محصولات مرتبط
DESCRIPTION
The TMC2100 provides an integrated motor driver solution for 3D-Printing, Cameras, Scanners and other automated equipment applications. The device has an integrated microstepping indexer, the completely noiseless current control mode StealthChop™ and is intended to drive a bipolar stepper motor. The output driver block consists of low RDSon N-Channel power MOSFETs configured as full H-bridges to drive the motor windings. The TMC2100 is capable of driving up to 2.5A of current from each output (with proper heatsinking). TMC2100 is designed for a supply voltage of 5~46V. The device has a step and direction interface and can be configured with digital pins.
:SPECIFICATIONS
Driver Type StepperMax. Current per Channel1A
:EXTRA SPECIFICATIONS
Interface: Step/Dir
Configuration: CFG Pins
Native Microsteps: up to 1 ⁄ 16
microPlyer Microsteps: 1 ⁄ 256
Logic Supply Voltage (VIO): 3 - 5V
Motor Supply Voltage (VM): 5.5 - 46V
Motor Phase Current max: 1.2A RMS, 2.5A Peak
Internal V- Regulator: enabled
RDSon: >=0.5 Ohm
stealthChop (quiet): Yes
spreadCycle: Yes
coolStep: No
stallGuard: No
dcStep: No
دیدگاه خود را بنویسید