این مجموعه شامل ماژول کنترلر دور موتور، منبع تغذیه، اسپیندل موتور و کابل میباشد.
محصولات مرتبط
این مجموعه شامل ماژول کنترلر دور موتور، منبع تغذیه، اسپیندل موتور و کابل میباشد.
- 400W CNC air-cooled spindle
- PWM speed controller
- MEAN WELL power supply - 48 V 350 W
- DC power cable -22AWG
Technical parameters of 400 W spindle:
- Working voltage: 12-48VDC
- Rotational speed: 3000-12000r / min
- Power: 400 W
- Torque: 500 mN. m
- Insulation Resistance:> 2 Megohm
- Dielectric strength: 400 V
- Motor length: 186mm
- Diameter: 52mm
- Axle bushing length: 48mm
- The diameter of the axis collect handle: 16mm
- Repeat, you can mention them: 0.01-0.03mm
Application :WorkBee CNC Router / OX CNC Router / advertising engraving machine /Woodworking engraving machines / CNC machine etc.
PWM speed controller technical data:
- Applies to DC12-60V low voltage permanent magnet brushed DC motor
- Working voltage: DC12V-DC60V (Max 65 V)
- Control mode:
- Default potentiometer (5 K-100 K), default 10 K;
- MACH3 PWM input signal speed regulation, external PWM input requirements:
- Level 3.5-12 V VPP, frequency 1 K-10 KHZ, suitable for MACH3 spindle speed control
Note: Any power connection network must be installed by a licensed electrician or fitness qualified person.
Power supply specifications:
- Producer: Mean Well
- Output voltage-channel 1: 48 V
- Output power: 350.4 W
- Open frame / closed: closed
- Input voltage: 90 VAC to 132 VAC / 180 v ac to 264 VAC, 240 VDC to 370 VDC
- Output current-channel 1: 7.3
- Mounting method: chassis
- Length: 215mm
- Width: 115mm
- Height: 30mm
- Input frequency: 47Hz to 63Hz
- Unit weight: 760g
Note: Any power connection network must be installed by a licensed electrician or fitness qualified person.
دیدگاه خود را بنویسید